Requirements

ConnectTime Interface Card (NIC) - Any brand that supports 10baseT or 10/100 standards with an RJ45 connector. ConnectTime can provide and install your NIC (additional fees may apply). If the NIC is to be installed by the subscriber, the card must be installed and functional prior to the DSL installation.

An AC power outlet (that can accept a power supply) and telephone jack - near the computer designated for DSL setup. In most cases if you are currently using dial-up services, you can use the same phone jack that your dial-up modem is currently using.

Installing and configuring ConnectTime DSL is simpler than other types of high-speed data connections like ISDN. Click Here for installation information.